Plug the mini USB cable from the mount into the camera's power portģ. Attach the camera to the mount by sliding it sideways onto the rotating head.Ģ. Watch this tutorial to learn how to hide the cable in just a few minutes.ġ. Gently but firmly stick the dash cam to the windshield.ĭriving with cables dangling is unpleasant, but there’s a simple solution.You won't see any indication on the interior facing camera that it’s working, but you can check the camera preview screen on the Nexar app. Place the interior facing camera next to the Nexar dash cam where it will have a good view of the inside your vehicle.īoth cameras automatically start recording after you begin driving. Plug the cable on the interior facing camera into the add-on port of the Nexar dash cam.Ģ. The camera’s indicator lights will turn on.ġ. Watch this video to know how to install your Nexar One dash cam from start to finish.ĥ. This will ensure the camera is supplied with enough power to operate properly. Please make sure that you are using all the original accessories (cable, mount, and cigarette lighter adapter) provided with your Nexar dash cam. Bring the cable as close to the power socket as possible, and connect the cable to the USB charger provided in the kit.Lay the remaining cable under the passenger-side floor mat.Bring the cable behind the glove compartment.Open the passenger side door and insert the cable into the door’s seal from top to bottom.You can also use the cable clips to attach the cable around the windshield instead. With your other hand, use two fingers or the installation tool to tuck the cable under the ceiling fabric.Sit in the passenger seat and with one hand, gently pull down the edge of the ceiling fabric where it meets the sides of the windshield.Gently but firmly stick the dash cam to the windshield.ĭriving with a cable dangling is unpleasant, but there’s a simple solution. Adjust the camera angle, making sure the camera is horizontal and not blocked by anything.Remove the protective film from the camera lens and mount the dash cam.Clean the windshield area where you decide to stick the mount. Check Nexar App to see that you have a full, clear view of the road and interior cabin (if applicable).Move to the front passenger seat of your vehicle.The Nexar app will show the dash cam’s previews.When it recognizes the add-ons, the blinking white light on the main camera will turn blue, blink twice, and then turn solid white.Please attach the +Connectivity add-on to the right-hand side of the dash cam and the cabin view camera on the left-hand side. Attach the cabin view camera and +Connectivity add-on. Remove the lids on both sides of the main unit.If you have purchased add-ons for your Nexar One dash cam, you will need to attach them to the main unit.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |